.png)
.png)
.png)
No.163, Jalan S2 C6,
Green Technology Park,
70300 Seremban,
Negeri Sembilan, Malaysia.
+606-6036161
+606-6030909
- Universal Testing Machine
- Rubber Testing
- Plastic Testing
- Metal Testing
- Paper Testing
- Environmental Test Machine
- Hardness Tester
- Metallographic Equipments
- Metrology Equipments
- Accessories
- Preowned Equipment
JNG Industry Sdn Bhd
No.163, Jalan S2 C6,
Green Technology Park,
70300 Seremban,
Negeri Sembilan, Malaysia.
No.163, Jalan S2 C6,
Green Technology Park,
70300 Seremban,
Negeri Sembilan, Malaysia.
Webster Hardness Tester
INTRODUCTION:
Features:
Technical Specifications:
Models:
- A portable instrument which can perform on-site hardness test on aluminum alloys. The test result can be got with only a simple clamp. It is convenient, efficient and reliable.
- Hardness tester is the preferred instrument for testing aluminum alloys mechanical performance in accordance with American standard ASTM B647.
- Used for quick test the hardness of aluminium profiles, tubings, sheets, accessories and other soft metal. Especially suitable for quick, non-destructive on-site 100% final products qualification test.
Features:
- Indenter: Re-engineered with advanced material and new production technology manufactured, higher hardness, long service life, good interchangeability.
- Indicator Hand: High strength indicator hand, less likely to be bent by long-term using or mis-operation.
- Dial Glass: High strength, high toughness, uneasy to be broken or scratched.
- Handle: Forged aluminum alloy handle with fine anodized finishing, high resistance to abrasion and stain.
- Hardness Blocks: Tested by standard Rockwell hardness tester, the hardness block are attached with test report.
- Stability: Stable full scale point, stable calibration point, indicator never glides.
- Conversion: Results can be converted to Vickers, Rockwell and Brinell.
Technical Specifications:
| Parameters | |
| Testing Range | 0 ~ 20 HW (equivalent to 20 ~ 110 HRE) |
| Resolution | 0.5 HW (5 ~ 17 HW) |
| Repeatability | 0.5 HW (5 ~17 HW) |
| Weight | 0.5 kg |
Models:
- W-20: the most popular model, used to test normal aluminum profiles.
- W-20a: used to test aluminum profiles with thickness within 13mm.
- W-20b: used to test aluminum tubings with inner diameter over 6mm.